SHIM R/END PLAY (400/4L80E) .005" -10 PK
# 36770-10

Rear End Play Shim, Pack of 10

SHIM R/END PLAY (400/4L80E) .005" -10 PK

.005" Thick

Sonnax offers two solutions for excessive endplay in GM 400, 425, 4L80-E and 4L85-E units. This Sonnax rear unit endplay shimcan be stacked under the four-tab metal thrust washer on the rear of the output shaft flange to set unit endplay in the same manner as the OE selective three-tab spacers. These shims eliminate the need to stock expensive or hard-to-find OE three-tab spacers and are an alternative to Sonnax shim. Shimming at this location maintains the stack-up height between the gear train main shaft and sun gear shaft.

  • Shims allow for setting of rear unit endplay by shimming components at the same location as OE selective spacers
  • Can also be used between the two carriers to optimize reaction carrier endplay

Specifications:

  • Material: Steel
  • Inner Dia.: 2.375"
  • Thickness: 0.005"
  • Outer Dia.: 3.250"

SONNAX Installation Instructions

Type of Product: Sundry Parts
Qty Needed:
Years:
Alternative #:
Ask for price